How to Hang Window Magnets Without Damaging Glass
By Swedish Candy Store NYC | Published: 2026-10-25
Category: How-to Guides
Learn how to safely install and remove window magnets on glass surfaces without scratches or residue—perfect for seasonal decorations or everyday fun.
Quick answer
Clean the glass first, then gently press the magnet on a dry surface. To remove without damage, slide a thin plastic card behind the magnet and lift slowly.
Why glass-safe matters
Hard magnets or abrasive debris trapped under the magnet can scratch glass when you slide or adjust them. A clean, dry surface is the best protection.
When to avoid adhesives
Most decorative window magnets rely on magnetic attraction alone and don't need sticky backing. If your magnet includes adhesive, test a small corner first to ensure the adhesive doesn't leave residue. The Growing Up Is A Trap Magnet, for example, uses only the magnetic force of its materials.
Step-by-step guide
- Clean the glass surface: Use a glass cleaner and a lint-free cloth to remove dust, grease, or moisture. Let the glass dry completely. Even a tiny grain of dust can scratch the glass when you move the magnet—check the surface in bright light.
- Position the magnet without sliding: Hold the magnet at the desired spot and press it straight onto the glass. Do not drag or slide it into place. Sliding is the most common cause of fine scratches. Lift and reposition if needed.
- Remove by lifting, not pulling: Slide a thin plastic card (e.g., a gift card) behind the magnet edge and gently lift upward. Pull the magnet away from the glass. Never yank the magnet off. The card prevents direct contact that could leave a mark.
Product facts
- Growing Up Is A Trap Magnet: 2" x 3" rectangular magnet with BonBon's motto: Growing Up Is A Trap! Its compact size and flat back make it simple to press onto window glass without extra tools, and it stays put until you slide it off.
Growing Up Is A Trap Magnet
